Filter By:
- Parts & Accessories (52)
- Headlights (4)
- Taillights (6)
- Show More Brands
- Show Fewer Brands
Lighting
$5.00
With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes.
- Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle.
- Includes stamped aluminum bracket that can be bent to adjust the light's angle.
- This mount features a snap-in, breakaway mount to protect light if snagged.
- Will only work with Specialized saddles with SWAT-compatible mount holes in the base.
- Includes mounting hardware.
$9.99
Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.
$9.99
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
$5.95
- Mounts most AA flashlights to handlebars and helmets
- Ideal low-cost lighting alternative for cyclists
$8.39
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$7.39
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$6.99
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 12
$6.99
- Simplistic safety light designed to be seen
- Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars
- 3 modes including 1 steady and 2 flashing modes
- Powered by 2 CR2032 batteries
- Lumens: 6
$8.39
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$8.39
• 2 bright Nichia LEDs
• Uses 2 CR 2032 lithium batteries (included)
• 100 hour run time
• 3 modes: 2 flashing and 1 steady
• Water-resistant silicone body
$9.49
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$5.09
- Replacement mounting straps for Sunlite lights
- Choose specific model to fit your light
$8.39
• 2 bright Red LEDs
• Includes 2 (CR 2032) lithium batteries
• 100 hour run time
• 3 mode (2 flashing modes & steady mode)
• Water resistant silicone body
$7.99
-Mounts easily to front racks with threaded M5 mounts
-Allows for unobstructed light positioning
-22.2mm clamping diameter
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light
- Designed specifically for aero seat posts
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
$5.99
- Quick Strap mounts, adjusts or removes in seconds without tools
- Fits 25.4-35mm handlebars
- Compatible with Blazes, Beamers, 1200 and Super Spot
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights
- Fits 25.4 – 31.8mm handlebars
$5.99
- Fits 25.4-31.8mm handlebars
- Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$6.99
- Compatible with seatpost diameter 20mm-36mm
- Adjustable light angle
- Easy on/easy off design makes for quick mounting and removal
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post.
- Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot.
- UV proof rubber strap
- Compatible with every PDW tail light except Asteroid and Fenderbot
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays.
- Seat post and seat stay brackets
- Rubber shims included for a custom fit
- Compatible with all PDW tail lights except Asteroid and Fenderbot
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works.
- Compatible with all PDW rear lights except the Asteroid and Fenderbot
- Horizontal holes are 50mm apart to fit European rack standards
- Vertical holes are 18mm apart to fit most reflector mounts
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts.
System Compatibility
- Sentinel
- Solas
- Sabre
- CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm.
SYSTEM COMPATIBILITY
- Lumina Series
- MiNewt Cordless Series
- Mako Series
WARRANTY
- This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.
System Compatibility:
- Lumina Series
- Mako Series
- MiNewt Cordless Series
Page 1 of 3
Next page