Hydration

XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.

- High flexibility injected Nylon material - Secure bottle design—no drop guarantee - Right side pull cage option is perfect for off-road or small frames - Weight: 41g

Features - High flexibility injected Nylon material - Secure bottle design—no drop guarantee - Right side pull cage option is perfect for off-road or small frames - Weight: 41g

- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material

The new design of the Custom Race Plus bottle cage streamlines the bottle for easier handling and improves bottle cage insertion/removal. - Painted with Fiber-reinforced (FRP) construction - Adjustable elastomer rubber shim - The choice of the world’s best Pro Teams

The choice of the best World Tour Pro Teams - Injection-molded bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion / removal is very easy. - Made in Italy

Caged up, recycled up. Made from recycled abandoned fishing nets which account for a large portion of all marine pollution, providing an eco-friendly hydration solution. Where it thrives: On the bike, out in the elements What it's built for: Durability, Convenience Highlights: - Made using recycled fishing nets: lightweight 38g and strong - Elongated mount holes for fine tuning position, fits all standard 74mm diameter bottles - Integrated bottle lock-ridge securely holds your bottle in place

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved clean-ability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. Features: - Double-walled construction: keeps water cold twice as long - Optimized cage fit: Engineered to securely fit in a variety of bottle cages - Easy squeeze: get more fluid with less effort - High flow, self-sealing cap: maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: ride clean, drink clean

Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them! Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc. - Easy to access bottles and out of the way of legs - Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately) - Use the DogBone base for curved downtube frames Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access. Tech Specs: - Material: 6061-T6 aluminum brackets - Weight: 18g - Maximum load: 1700g - Tools Needed: T25 Torx - Torque: 3-4 Nm - Made in the USA

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

Fancy up that bottle cage with a fresh new water bottle from Whisky Parts Co. This insulated 23-oz. bottle with a MoFlo cap makes instant refreshment possible! - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort

With this new Trimax grip cage, you won’t need to worry about losing your bottle out on the road. You can take on any terrain and still find your bottle intact. It is also compatible with the Trimax Rear Hydration System. - Water bottle cage with greater stiffness to prevent unintentional bottle release - Reinforced ribs and sturdy bottom shelf for positive engagement and release - Universal bottle fitment - Fiber-reinforced Nylon body - 20mm of adjustability for the ideal mounting position

The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g). The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.

These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.

The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.