Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Handlebar Grips/Tape

$28.95
The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
$27.00
The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.
$27.99
Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit
$45.00
Our best-selling Super Sticky Kush tuned and tailored to the specific needs of gravel. Plush 3.2mm of thickness for extra shock absorption and control. Each roll is extra long to give you the freedom to wrap any way you want. - Tackiest/Best Hand Feel - Long Lasting PU Tape - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape - Material: PU Length: 2200mm Width: 30mm Thickness: 3.2mm
$24.99
- EVA foam & cork tape - Asymmetrical hollowing keeps the overlap smooth, eliminating bulges - Good grip in all conditions - Vibration absorbing
$26.99
A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm
$14.99 - $19.99
Oury single compound grips. Simple & classic. - Soft grips with raised blocks
$20.00
The extra material on MSW's EFG-100 grips isn't for good looks: it's to spread the pressure across more of your hand, resulting in less stress and fatigue. • Comfortable, ergonomic shape • Reduces hand fatigue while riding • Thermoplastic rubber
$24.95
NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.
$32.99
The 711 features perfect grip ergonomics for long-distance routes and use in racing XC style mtb. A well thought-out, highly ergonomic shape offers an especially secure grip and maximum comfort, while a full locking inner sleeve allows for infinite adjustment, allowing the rider to get that "just right" feel. The scope of delivery includes one set of grips. Strategic clamp placement increases the shock absorption and comfort on the outside of the hand. In addition, the outside surface area was increased using every trick in the book, making the new 711 Tech and Trail 2.0 as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: with the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control. The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.
$10.99 - $11.99
The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm
$34.95 - $44.95
The Ritchey Classic Locking grip delivers excellent feel and durability with a timeless and classic aesthetic. - Dual-sided locking mechanism debossed logo - 112g/pair
$13.95
The Ritchey Comp EVA bar tape is soft and comfortable while providing a true road feel.
$19.95
The Ritchey Comp bar tape is a more traditional bar wrap made from the highest quality cork tape, which is naturally sweat-resistant and comfortable while providing a true road feel. - Material: EVA + Cork - Adjustable end plug - Self-adhesive backing - Thickness: 2.4mm - Length: 180cm - Weight: 74g - Embossed TR logos
$12.95
The slender WCS Truegrip mountain bike grips deliver a lightweight, comfortable, and faithful ride experience out on the trails. - Material: HD foam - Density: single - Shape: hexagonal - Locking: no - Ends: open - End-plugs: included - Length: 130mm - Diameter: multiple - Weight: 43g (w/o plugs)
$32.95
Ritchey WCS Python Trail Grips. The heart of these new grips is Tom’s patented Python self-tightening helical core design. With a spiral inner grip surface designed to literally constrict around the bar the instant that the grip starts to twist, the Python grips ensure no slippage in even the most gnarly conditions. Fastened into position with an integrated lock ring, the ergonomically shaped Python grips also feature tripledensity Kraton rubber that provides welcome support for your hands.
$53.99
- DSP Bar Tape V2 features a new pattern, an upgraded polymer and a screw-in bar plug - The new pattern is more technical with a new design and multiple layers of depth - The polymer has new formula enhanced for more durability and comfort - The new plug provides a clean, tight finish.
$11.90 - $13.90
- Shock absorbing 2.5mm EVA blended tape - Adhesive backing, chromed plastic bar plugs, finish tape included - Enough tape for one complete road drop-bar
$37.99
The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend
$31.99
ESI's ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. XC stands for Extra Chunky. - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$27.99
The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.
$26.99
Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps
$27.99
What comes between you and the mountain bike you love? The Love Handle, a very thin profile, double lock-on grip featuring Race Face's durable yet super tacky silicone compound that delivers long wear and all weather stickiness. The Love Handle is not only about its silicone good looks though, the palm area is contoured with channels to allow air to circulate and moisture to dissipate while the diamond pattern in the finger grip zone provides tons of control. Get a good grip; you won't want to lose these love handles! - Double lock on grip - Super slim low profile design with directional shape - Race Face's durable yet super tacky silicone compound won't wear out as quickly as typical grips and have a superior sticky feel even when wet - Directional design features contoured palm area with moisture dissipating channels and diamond patterned underside to enhance finger control and mitigate unwanted slips - Lightweight construction
$9.99
WeThePeople's Manta Grip is super-thin with a unique ripple pattern for a more direct feel on the bars. It's made with super-soft rubber for a better feel instantly.
$19.99
Love the size of Chunky but desire extraordinary? Ribbed has 8 distinct ribs that optimize shock absorption and grip! - 60 Grams - Standard Grip Length – 5 1/8? - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included *Install Bar Plugs first for the protection of grips and ease of installation *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$22.99
The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation
$31.99
ESI’s ergonomic Fit Grips are designed for a completely natural hand position on your handlebar. Our new designs balance the pressure that your hands exert onto the handlebars, increasing bar control dramatically. Fit SG grips give you the perfect flat platform with a double step-down ledge for excellent grip while driving through corners and the perfect braking position. The open texture with micro ribs gives you supreme contact. You will want to get your hands on these! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation - *Colors may vary from screen to screen. NOTE: Our Black is a dark charcoal gray.
$45.99
ESI Grips NEW RCT Wrap is perfect for Road, Cyclocross, or Triathlon riders, especially riders looking for extra shock absorption and comfort compared to a normal bar tape. ESI RCT Wrap is constructed for a smooth overlay and customizable thickness. If you are looking for a thick grip, wrap it looser. If you are looking for a thinner grip, wrap it tighter. It's that easy! - 134-176 grams (Depends on how you stretch) - 3.5mm Thick - 1" Wide - 2 Rolls at 6'2" each - Custom Fit - Stretchable - Custom Density - Shock Absorbing - Comfortable - Super Tacky - No Adhesives - Long-lasting - Easy to Install Package Includes: - 2 long silicone wraps (for wrapping bar) - 2 short silicone wraps (for under hood) - 2 Silicone Tapes (adhere to themselves – 1-time use) - 1 pair of NEW custom larger Bar Plugs
$31.00
Chromag's Basis grip is designed for applications where the rider wants a firm, direct connection for performance in high intensity scenarios. The thin diameter grip with dimpled pattern is firm yet tacky and less prone to surface wear. Chromag grips feature their unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
$29.95
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.