Wheels

A sleeved AM rim, supporting modern tires with its 30mm inner width. Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.

The ARC 1400 DiCut delivers its full potential whenever your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain. - AERO+ optimized rims by Swiss Side - Stainless steel bearings

Snappy acceleration is what you can expect from this aluminum wheel developed to meet all cross country needs. If, to you, cross country means high-speed, after-work rides, and the occasional endurance race, then you should have a closer look at the XR 1700 SPLINE wheels. With a light and welded cross country aluminum rims, reliable 36T RATCHET SL hubs, and Swiss precision finish, all the way from the competition spokes to the signature DT Swiss wheel build quality, it's a wheelset that is up to competing, day-in, day-out, against yourself, against your buddies, or in an all-out race.

Modern welded XC rim, developed with a 25mm inner width. Modern-day XC rim: The right width to run wide tires necessary to be competitive on today's demanding Cross Country courses. The welded construction of the XR 391 and the bead-blasted, anodized finish are on par with your high-end XC ride. The use-specific profile, the custom alloy, and the use of the PHR nipple interface allow you to pair the unpairable: Wide, strong, and light.

This rim is your robust and reliable companion for all rides. The R 500 supports your riding, day-in and day-out, over thousands of kilometers, all at an unbeatable price-performance ratio.

This rim can take heavy loads and cope with demanding surfaces at the same time! Are you searching for a pair of rims to ride off the beaten path? If so, the RR481 may be the perfect option for you. With an inner width of 22mm and approved up to a 130kg system weight, this extremely durable rim is made for rough, off-road rides. Whether you mount them on your Cyclocross bike, your gravel racer, or for your next bike-packing trip, the RR 481 won't let you down.

A 25mm welded rim made for the demands of AM. Lightweight rims as wide as most downhill rims were just a couple of years ago? State-of-the-art materials and extensive testing make it possible. DT Swiss knows exactly how light it can design a product to fulfill its purpose to perfection. This is why the XM 421 is as light as an All Mountain rim can get, yet still fears no trail, no matter what rock gardens it has on the menu.

This sleeved, 25mm-wide, light, and strong rim is as versatile as AM riding itself. Derived from our extremely successful Enduro rims, which have won at the world's highest level under the world's fastest racers, the M 462 packs that world-class technology into a slightly slimmed package for All Mountain use while staying affordable thanks to the sleeved rim joint.

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Replacement spoke kits for DT Swiss PR1400 wheels. - Includes 6 spokes and 6 nipples

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs and Competition Race spokes, allowing every bit of energy to be transferred into forward motion. - Designed for Cross Country applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

This welded, 30mm-wide E-MTB rim is the ideal all-rounder. When you head into the unknown, the HX 531 is the perfect choice with a 30mm internal width to support meaty tires. With an ideal position in the middle of the strength to weight to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Drilling 36 - Hub Model Formula FM-31 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18

- Aluminum hub body - Sealed bearings - 100mm OLD - 6-bolt disc rotor mount

Replacement axle sets for use with Origin8 FB-2000 hubs Front Axle: - 3/8 x 26 x 135 x 175 Rear Axle: - 3/8 x 26 x 170 x 210

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminents - 15mm Thru Axle, 6 bolt disc compatible in boost and standard configurations

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - 20mm Thru Axle with 15mm option, 6 bolt disc compatible

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano XT HB-M8110-B Boost - 15x110mm (Axle not incl.) - Center Lock (6-Bolt adapter incl.) - Polished angular contact bearings - Contact sealed hub Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter incl.) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included) - MS compatible 12 Spd Micro Spline Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)