Racks

Low or high rider? Just take both! tubus presents the first combi-carrier that combines the properties of both systems: Lateral driving stability thanks to the low center of gravity, with space on top for bulky items such as a sleeping pad and sleeping bag. With the GRAND EXPEDITION FRONT for the front, you don't have to make any compromises when transporting luggage. This is tube. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer or the bicycle manufacturer for mounting a luggage rack. There must be no squeeze connections.

- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

Specifically engineered to fit a 12-pack of beer and your u-lock, this classy rack is ready to haul it all! Whether it's a run to the corner store, class, or just another day at the office the Urban Rack will cradle your essentials comfortably between its tie-down rails, or you can remove the rails to tote extra-wide loads all the way to your destination! - 9 1/2" wide x 11 1/4" long x 3" high for inside rail measurement.

The Benno Utility Rear Rack #3 Plus is a direct fit to the Benno Boost E bikes. The 66cm x 18cm platform allows the use of up to 2 Yepp Easyfit Baby seats without adaptors. Integrated side loaders allow easier carrying of bulky items and provide a footrest option for older children. The rack is rated to carry up to 130lbs of kids, gear or any combination of both. - Max deck load 130lbs/60kg, Max side load 35lbs/15kg each side. - Total load capacity 130lbs/60kg - Fits two Yepp Easyfit baby seats without adapter - Dimensions: Deck 18cm x 66cm (W x L) - Weight: 3240g

The Benno Mini Front Tray rack mounts directly to the frame of Pre-2020 Boost E, eJoy, eScout, RemiDemi and Carry On models, holding up to 35lbs of cargo. - Dimensions: 28cm x 28cm x 6cm (W x L x H) - Max load: 35lbs/15kg

You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).

All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

Genuine replacement parts. A MIK-compatible rack that is easy to mount. Details: - MIK: Mounting Is Key - MIK mounting system provides security and integration - Mounting hardware not included

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

Whether you're kitting out your ride to be a full-on grocery-getter or just trying to get that sweaty backpack off your back, this adjustable rack gives you a whole new home for all of your haul-ables! - Aluminum - Carries up to 20 lbs - Easily add a crate! - Fits on all Pure Fix and Pure City bikes EXCEPT Premium Series, Urban Commuter, and Keirin Track Completes

Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

The Benno Utility Front Tray rack mounts directly to the frame of Boost E, eJoy, eScout, RemiDemi and Carry On models, holding up to 45lbs of cargo. - Max load: 45lbs/20kg - Dimensions: 46cm x 32cm x 14cm (W x L x H) - Weight: 1740g

The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability. - Weight: 730g/1.6 pounds - Carrying Capacity: 40kg/88 pounds

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 242 x 97 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 3 kg WEIGHT - 281 g (incl. Straps)

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 26" city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The Demi Porteur Rack is a wide but compact rack that installs on your fork's mini rack mounts or via P-clamps (included). Ideal for supporting larger bar bags like an Ocean Air Docena or Ostrich F-702 or a wire basket - Aluminum construction - Platform: 26cm x 30cm - 10kg load capacity - Includes Manny Strap - Weight: 530g - Satin polish silver or Black - Made for us by the folks responsible for Tanaka Fenders. If installing to a braze-on, the braze-on needs to be about 140mm from the brake hole on the crown. If your braze-on is too low, you will need to install using P-clamps on the legs.

Great little aluminum rack. Perfect for strapping a Wald basket to, or on its own to support a handlebar bag. Stainless hardware, includes mounting tang and spacers so that you can clear the fork leg when you mount to the eyelets on the backside of your fork. Works well with a set of P-clamps as well (included). The Lucas 3 differs from the Lucas 1 in that we added a mid-fork mount for extra stability. - Round eyelets for strapping/zip-tying things on - Platform measures 240mm x 130mm - The eyelet to the bottom of the rack is 365mm. - Load capacity: 10kg/22 lbs. - Greyish silver or black - Weight: 570g

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Designed to fit two 18-packs of your favorite beer (or your lunch, laptop, groceries, etc...), this handy rear rack is ready to haul it all! Removable tie-down rails give you somewhere to strap down loose loads or pop them off to create a flat-bed rack that can handle those 3 XL pizzas you just ordered. One ride with this rack and you'll wonder how you ever managed to carry everything without it.